What Is VDA 6.5 and Why Is It Critical in the Automotive Industry?
VDA 6.5 is a standard used in the automotive industry that defines requirements for managing product audit programs and conducting product audits. It was developed by the German Association of the Automotive Industry (Verband der Automobilindustrie). The currently applicable version is the third edition, published in March 2020.
The requirement to conduct product audits in accordance with VDA 6.5 primarily applies to suppliers to German OEMs (Original Equipment Manufacturers). The standard is used for both internal audits and audits throughout the supply chain.
A VDA 6.5 product audit can cover:
- Finished products
- Semi-finished products at any stage of the production process
Good to know! A product audit is an independent assessment, separate from routine quality inspections. Its primary purpose is to identify systemic weaknesses in the manufacturing or assembly process that may have allowed a defect to pass through the existing inspection controls.
Which IATF 16949 and CSR Requirements Does VDA 6.5 Help Fulfill?
The VDA 6.5 manual is primarily a practical tool that helps organizations meet requirements imposed by both IATF 16949 and CSR (Customer-Specific Requirements) in the automotive industry.
- IATF 16949, Clause 9.2.2.4 – Defines requirements for product audits, which must be conducted using methods specified by the customer and at various stages of the production and delivery process. Although IATF 16949 does not prescribe a specific method, VDA 6.5 is often considered the minimum expected standard in European supply chains.
- CSR (Customer-Specific Requirements) – Major German automotive manufacturers, including Volkswagen Group, BMW, and Mercedes-Benz, explicitly require their suppliers to conduct product audits in accordance with the VDA 6.5 manual.
VDA 6.5 vs. VDA 6.3 – The Difference Between a Product Audit and a Process Audit
“VDA 6.3 vs. VDA 6.5” is probably one of the key questions that a quality engineer new to the automotive industry needs to understand. This is particularly important when a quality management system certification audit is approaching or a customer is about to visit. The most important thing to remember is that these standards cover two completely different types of audits. This does not mean, however, that they cannot complement each other in practice.
Remember! VDA 6.3 is used to assess how a product is manufactured, i.e., the manufacturing or assembly process. VDA 6.5, on the other hand, focuses exclusively on the result – the product or semi-finished product itself.
The table below provides a quick reference covering the key differences between VDA 6.3 and VDA 6.5.
| Criterion | VDA 6.3 – Process Audit | VDA 6.5 – Product Audit |
|---|---|---|
| Main purpose | Assessing process conformity with requirements | Verifying product quality from the end customer’s perspective |
| Audit subject | Documentation, performance indicators, workstations, machinery, and personnel | Finished parts or semi-finished products, functionality, and packaging |
| When is it performed? | After production launch (SOP) and in response to customer complaints | In accordance with the annual audit schedule |
| Scoring system | Point-based scoring and supplier classification (A, B, C) | Defect classification (A, B, C) and the QKZ quality indicator |
Tip! If a recurring defect is identified during a product audit, it is good practice to conduct an audit of the specific process in which the non-conformance occurs.
The VDA 6.5 Audit Process – Key Elements
Audit Program vs. Audit Plan – Why Shouldn’t These Terms Be Confused?
VDA 6.5 places considerable emphasis on distinguishing between two fundamental concepts: the Audit Program and the Audit Plan. Both can be somewhat confusing, even for more experienced auditors and quality engineers. However, it is important to remember that these are two entirely different documents. This distinction is also explained in ISO 19011, the standard providing guidelines for auditing management systems.
Let’s take a look at the key differences between these two documents:
- Audit Program – a high-level document, usually presented as an annual schedule. It contains basic information, including which product groups will be audited during a given calendar year, when individual audits are scheduled, and who will perform them. The audit program is closely linked to risk analysis, which provides the basis for scheduling individual audits. Key risk factors may include:
- Customer complaints
- Product complexity
- New production launches (SOP)
- Audit Plan – a document relating to a specific audit and covering an individual product audit scheduled as part of the Audit Program. An Audit Plan typically includes:
- Part number and revision level
- Sample size
- List of required documentation
Sampling – Key Principles and Good Practices
The fundamental principle of sampling is complete randomness. This applies both to parts currently in production and to finished products held in warehouse inventory. This approach ensures that the audit is conducted on samples that reflect actual product quality.
Remember! Never inform production personnel in advance that you intend to sample specific parts. Otherwise, they may “accidentally” prepare a batch of perfect parts that may have little in common with the quality of parts typically produced under normal operating conditions.
The sample size should take into account the criticality of the product as well as its level of complexity. The standard itself does not specify a fixed number of parts to be inspected. In practice, sample sizes most commonly range from 3 to 10 pieces.
If the product audit covers finished products, the warehouse is usually the best place to collect samples. In addition to inspecting the parts themselves, this allows the auditor to verify how they are protected (e.g., against physical damage or corrosion), as well as whether the packaging and labels comply with requirements.
Scope of a VDA 6.5 Product Audit
One of the key advantages of the VDA 6.5 manual is that it does not impose rigid requirements on the scope of a product audit. This gives organizations full flexibility and allows them to focus on the characteristics that are most important to the customer. Experienced auditors typically focus on the following areas:
- Dimensional conformity – verification of Special Characteristics, critical-to-quality characteristics (CTQs), and tight assembly tolerances.
- Material conformity – verification of material test reports and certificates.
- Functionality – confirming that the product performs as intended, e.g., checking electrical circuit continuity or system leak tightness.
- Appearance and tactile characteristics – visual and tactile inspection for defects such as scratches, discoloration, sharp edges, and flash.
- Packaging and labeling – verification of packaging cleanliness, quantity per package, protection against damage, and barcode accuracy. Despite being just as important as the product itself, this aspect is often overlooked during product audits.
- Odor and emissions – checking parts for irritating odors and volatile organic compounds (VOCs). This is a critical aspect for interior components, such as dashboards and seats.
- Traceability – verifying the legibility of markings on critical parts bearing serial numbers or Data Matrix codes.
- Software – verifying that the product contains the latest software version approved by the customer.
- Technical cleanliness – inspecting for foreign objects and contaminants, including metal particles, chips, masking materials, plugs, and even coolant residue.
Tip! When inspecting parts, particularly for visual defects, it is essential to provide adequate lighting at the inspection station. The illuminance level should generally be at least 1,000 lux, as lower levels may be insufficient for this type of inspection.
Remember that dimensional verification during a product audit does not cover every characteristic specified on the engineering drawing. That is the responsibility of routine quality inspection.
Defect Classification According to VDA 6.5 and the QKZ / QI Indicator
One of the key requirements of VDA 6.5 is to establish a three-level defect classification system that takes criticality and risk into account. To achieve this, the manual promotes an approach based on three letter categories (A, B, and C) combined with a point-based scoring system. This is the approach most commonly encountered in supply chains serving German OEMs.
Tip! If our customer does not clearly specify the details of the classification scale, we can also implement our own system. However, it is important to ensure that the system is clearly documented. One possible alternative is a classification scale based on the following categories: Critical, Major, and Minor.
Class A Defect – Critical
A Class A defect is a non-conformance that directly affects the safety and health of the end user or violates applicable legal requirements. It renders the product completely unfit for its intended function. There is absolutely no room for negotiation when it comes to this type of defect. If such a defect is accepted, a customer complaint is virtually certain. If a larger number of parts are affected, a product recall may even be necessary.
Example: Damaged thread on a structural component of the steering system
Point Value: 10
Class B Defect – Major
A Class B defect does not affect user safety but significantly impairs the product’s functionality or negatively affects the end customer’s perception of its quality. The defect is highly likely to be noticed by the customer, who will then file a complaint.
Example: Deep scratch in a prominent area of the dashboard
Point Value: 5
Class C Defect – Minor
A Class C defect is often referred to as a cosmetic defect and frequently goes unnoticed by the end user. Even if it is noticed, it is unlikely to result in a customer complaint in most cases. However, it is important to remember that it still represents a deviation from specification requirements and must therefore be documented in the audit report.
Example: Minor scratch inside the passenger-side glove compartment
Point Value: 1
Product Quality Index (QKZ / QI)
The Product Quality Index provides a simple way to compare different products and standardizes how VDA 6.5 audit results are reported.
It may be referred to as:
- QKZ (German: Qualitätskennzahl)
- QI (Quality Index)
- PQI (Product Quality Index)
How to Calculate the QKZ
The Product Quality Index is calculated using the following formula:
QKZ = 100 – (FPZ / N), where:
- FPZ – total number of defect points
- N – number of inspected parts
To calculate the total number of defect points, use the following formula:
FPZ = (A * 10) + (B * 5) + (C * 1), where:
- A, B, C – number of defects identified in each respective class
A perfect product receives a QKZ score of 100. Each additional defect gradually reduces the final score. If a high accumulation of defects results in a negative value, the QKZ is set to 0. The acceptable threshold depends on the requirements established by the organization.
Case Study: How a Product Audit Uncovered a Defect That Had Passed Final Inspection
Now that we have covered the theory, let’s see how a VDA 6.5 product audit holds up in real-world manufacturing conditions. We’ll look at an interesting case that clearly demonstrates the added value of a product audit. The product being audited is a simple air vent grille designed for the premium vehicle segment.
Background
The supplier being audited was a small company specializing in complex components made from PC/ABS.
The organization’s manufacturing process appeared to be fully stable:
- After injection molding and assembly, the line operator visually inspected every part for defects such as scratches, short shots, and sink marks.
- Dimensions critical to assembly were regularly checked by the Quality Department using a coordinate measuring machine (CMM).
- Conforming parts were packed in KLT containers with dedicated separators, wrapped in plastic film, and transferred to the shipping buffer area.
The internal defect rate was close to zero.
Why Did Routine Quality Inspection Fail While the VDA 6.5 Audit Succeeded?
In accordance with the annual Audit Program, a VDA 6.5 Product Auditor visited the supplier and began sampling parts from the finished goods area. The auditor selected a random KLT container that was wrapped and ready for shipment.
The auditor took on the role of both the customer and an assembly line worker at an automotive plant. After opening the packaging, the auditor began the inspection. The parts were flawless in terms of both dimensional accuracy and appearance. The next step was functional testing. The auditor grasped the slider that controls the vent louvers to check whether it moved smoothly.
It turned out that in three out of the five sampled parts, the slider jammed when moved to its far-right position. Considerable force was required to move it, which was completely unacceptable for a premium vehicle.
So why hadn’t routine quality inspection detected this issue? The operators on the production line tested the sliders, and they all worked smoothly. The problem actually occurred after the quality inspection. After ultrasonic welding, the parts were packed into KLT containers while the plastic was still relatively warm. The packaging separators were designed with such tight clearances that they exerted slight pressure on the air vent frame. As a result, the warm part became slightly deformed while compressed during internal handling, eventually causing the internal mechanism to jam.
Summary
VDA 6.5 is an essential manual for suppliers to German OEMs. It defines the principles for planning and conducting product audits. Its scope covers the assessment of:
- Finished products
- Semi-finished products at various stages of the manufacturing process
A VDA 6.5 product audit typically covers the verification of:
- Dimensions
- Material conformity
- Functionality
- Appearance and tactile characteristics
- Packaging and labeling
- Odor and emissions
- Traceability
- Software
- Technical cleanliness
An important element of product assessment is a system based on a three-level defect classification that takes defect criticality into account. It most commonly uses the categories A, B, and C. The final audit result is expressed using the Product Quality Index (QKZ / QI).
I hope that the difference between VDA 6.3 and VDA 6.5 is now clear to you. If you have any questions about this article or would like to share your own experience, feel free to leave a comment below. See you next time!
FAQ – Frequently Asked Questions
What is a VDA 6.5 Product Audit?
VDA 6.5 is a standard that defines the principles for conducting product audits in the automotive industry. It is used to independently assess a product from the end customer’s perspective.
What is the difference between VDA 6.3 and VDA 6.5?
VDA 6.3 assesses product and process characteristics as well as how the product is manufactured (Process Audit), whereas VDA 6.5 focuses exclusively on the product or semi-finished product (Product Audit).
What are the defect classes in VDA 6.5?
VDA 6.5 requires a three-level defect classification system. It recommends an approach based on letter categories: A (Critical – affects safety), B (Major – impairs functionality), and C (Minor – cosmetic).
What is the QKZ indicator in the automotive industry?
QKZ (Qualitätskennzahl) stands for Product Quality Index. It is calculated based on the total number of defect points and the number of inspected parts. A perfect product achieves a QKZ score of 100.
How large should a sample be for a VDA 6.5 Product Audit?
The standard does not prescribe a fixed sample size. The sample size (typically 3–10 parts) is determined in the Audit Plan based on risk analysis and product complexity.



